The 10 Most Unanswered Questions about

What to Do When Changing Coolant on Your Car

Fluids are important to keep your car running excellently. Once you take a look at these fluids then one of the most important is the antifreeze or coolant. This is needed to sure that your car will not overheat. This one works by absorbing excess heat in your engine. Keeping it on its normal level is an important thing.

It is changing the coolant that you will need to do based on the mileage of your car. See to it that you are able to change your coolant after 60,000 miles up to 100,000 miles. Checking your manual to know when you should change your coolant is a thing that you can also do. You need to remember that your coolant should not run low. t is your radiator that might have a leak once your coolant runs low.

If you plan on doing this on your won then see to it that you will be able to buy a new coolant for your car. It is also important that you will be buying a radiator flush product. This is needed to clear out your cooling system. Once you are ready with theses things then there are steps that you will need to follow.

Minding your safety first is a thing that you will need to do. Always make sure that you will not be changing your coolant while the engine is running. Let the engine cool down first before doing the procedure.

What you need to do next is to remove the radiator cap and locate the drain plug. See to it that you are able to place a pan under the drain plug so that you can catch the old coolant. Once this is in place, you can now loosen the plug and let the old coolant drain into the pan.-this company

Filling the cooling system with ware is the next thing that you will need to do. It is the remaining coolant that can be flushed out once you will do this one.

Putting the radiator cap back and running the car for at least 10 minutes is what you will have to do next. The water will flow once this is done. Once the time elapsed, you can now turn off the car and let it cool again. Doing this process at least 3 times is a thing that you will need to do.

Putting the radiator flush to the cooling system is the next thing that you need to do. Putting the radiator cap and running the engine again is a thing that you will need to do.

Once you are done, let the engine cool down again. The last thing that you need to do is to close the drain plug and pour the coolant into your cooling system.-view here for more

More reading: find more information